|
Product Series of Super Circular Loom from CHANGSHENG TECHNOLOGY |
|||||||
|
Model Item |
SPCL-6/3200 | SPCL-8/4400 ground plan |
SPCL-8/5000 |
SPCL-10/6000 ground plan |
SPCL-12/8000 | ||
| Shuttle(pieces) | 6 |
8 |
10 | 12 | |||
| Max Width(mm) | 3200 | 4400 | 5050 | 6050 | 8050 | ||
| Warp(piece) | 1920 | 2400 | 2800 | 3200 | 4000 | ||
| Weft Density(/inch) |
5 - 20 |
||||||
| Tube(mm) |
f38 x 230 f38 x 270 |
||||||
| Rotating(rpm) |
5-90 |
5-62.5 (max70) |
5-55 (max 60) |
5-45 (max 50) |
5-32 (max35) |
||
| Cast Rate (Shuts/min) |
600 max |
560 max | 480 max | 500 max | 420 max | ||
| Main Power(Kw) |
5.5 |
7.5 | 11 | 11 | 15 | ||
| Dimension (m LxWxH) | 15x3.4 x3.5 | 15x4 x4 | 15x4.2 x4.5 | 15x4.6 x5.5 | 18x5.5 x6.8 | ||
| Weight(ton) | 5 | 7.5 | 8.2 | 9.6 | 14 | ||
|
Slit Film Woven Geotextile(International) |
|||||||||
| PROPERTY | STANDARD | UNIT | |||||||
| Unit Weight |
ASTM D-5261 |
g/m2 | 150 |
180 |
200 |
250 |
350 | ||
| Grab Tensile | ASTM D-4632 | kN/m | 30 | 40 | 50 | 60 | 80 | ||
| Grab Elongation |
ASTM D-4632 |
% | <=20 | <=20 | <=20 | <=18 | <=15 | ||
| Puncture | ASTM D-4833 | kN | 0.4 | 0.6 | 0.8 | 0.95 | 1.3 | ||
| Coefficient of Permeability | ASTM D-4491 | cm/sec | 10-2 - 10-3 | ||||||
| Apparent Opening Size | ASTM D-4751 | mm | 0.08-0.40 | ||||||
| Width | m | 5.0-6.0 | |||||||
| Roll Length | m | <=500 | |||||||
| Roll Weight | Kg | <=500 | |||||||
|
Slit Film Woven Geotextile |
|||||||||||
|
Code Item |
CEF-2102 | CEF-2103 | CEF-2104 | CEF-2105 | CEF-2106 | CEF-2108 | CEF-2109 | CEF-2111 | CEF-2113 | ||
| Unit Weight(g/m2) | 120±6 | 150±8 | 200±10 | 250±10 | 280±10 | 330±15 | 400±20 | 480±20 | 580±20 | ||
| Thickness (2kPa)mm |
0.40 | 0.48 | 0.60 | 0.72 | 0.85 | 1.00 | 1.25 | 1.45 | 1.70 | ||
| Radial Grab Strength(kN/m) |
≥20 |
≥30 | ≥40 |
≥50 |
≥60 |
≥80 |
≥90 | ≥110 | ≥130 | ||
| Latitude Grab Strength(kN/m) | ≥14 | ≥21 | ≥28 | ≥35 | ≥42 | ≥58 | ≥63 | ≥77 | ≥91 | ||
| Radial Grab Elongation(%) |
15 - 25 |
18 - 28 | |||||||||
| Latitude Grab Elongation(%) |
15 - 25 |
18 - 28 | |||||||||
| Puncture Strength(kN) | 0.25 | 0.35 | 0.45 | 0.70 | 0.95 | 1.10 | 1.25 | 1.40 | 1.60 | ||
| CBR (kN) |
1.8 |
2.8 | 3.6 | 4.5 | 5.5 | 7.0 | 8.6 | 9.5 | 11.2 | ||
| Equivalent Apeture(O95)mm | 0.08 - 0.4 | 0.12 - 0.4 | |||||||||
| Coefficient of Permeability (cm/s) |
10-2 - 10-3 |
||||||||||
| Relative Strength% | 0.76 | 0.91 | 0.97 | 1.1 | 1.02 | 1.04 | 1.02 | ||||
| Roll Width Series(m) | 3.8, 4.0, 4.1, 4.2, 4.4 , 4.5, 5.0,5.2, 5.5,5.8, 6.0 | ||||||||||
| Roll Length (m) | depending on requirement, single roll less or equal 1500kg | ||||||||||